Product ID:(TM) 2216B/A PART A GREY EPOXY ADHESIVE
MSDS Date:04/12/1990
FSC:8040
NIIN:01-311-6475
Kit Part:Y
MSDS Number: BSFMD

MINNESOTA MINING & MFG CO

3M CTR 224-2S-25
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

AMINE TERMINATED POLYMER

Fraction By Weight: 55-70%

OSHA PEL NONE ESTABLISHED

ACGIH TLV: NONE ESTABLISHED

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 30-45%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0-0.1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:IRRITATION TO EYES ON DIRECT CONTACT.
SKIN IRRITATION FROM PROLONGED CONTACT AND, ALLERGIC REACTIONS FOR
SOME INDIVIDUALS. IRRITATION TO RESPIRATORY SYSTEM
Effects of Overexposure:EYE IRRITATION, SKIN ALLERGIES/IRRITATION,
RESPIRATORY SYSTEM IRRITATION.
Medical Cond Aggravated by Exposure:SKIN ALLERGIES, RESPIRATORY
AILMENTS

First Aid:FLUSH EYES W/ LARGE AMOUNTS OF H2O FOR AT LEAST 15 MIN.CALL
PHYSICIAN. SKIN: WASH AFFECTED AREA W/ SOAP AND WATER.
INHALATION- REMOVE AFFECTED PERSON TO FRESH AIR. CALL PHYSICIAN.
INGESTION- DO NOT INDUCE VOMITING. IMMEDIATELY CALL PHYSICIAN OR
POISON CONTROL CENTER.

Extinguishing Media:C02, FOAM, DRY CHEMICAL, WATER
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE. NFPA HAZARD CODES: HEALTH-2,
FIRE-0, RECTIVITY-1

Spill Release Procedures:VENTILATE AREA, USE PPE TO COLLECT SPILLED
MATERIALS. PLACE IN APPROVED US DOT CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATHING VAPORS DURING HEAT
CURING. KEEP CONTAINER CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF
CHILDREN
Other Precautions:AVOID EYE CONTACT WITH OR BREATHING DUSTS FROM
CUTTING GRINDING OR SANDING OPERATIONS ON THE CURED PRODUCT.

Respiratory Protection:CONTACT LOCAL SAFETY/INDUSTRIAL HYGIENE OFFICE
TO DETERMINE IF RESPIRATORY PROTECTION IS REQUIRED
Ventilation:USE MECHANICAL VENTILATION TO KEEP VAPOR BELOW TLV, TWA
WHEN USING THIS PRODUCT. EXHAUST SHOULD BE VENTED TO OUTSIDE
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEMICAL SAFETY GLASSES/GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING AS NECESSARY TO PREVENT
SKIN CONTACT
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
THIS IS ONE PART OF A KIT, PLEASE SEE OTHER PARTS OF THIS KIT FOR
ADDITIONAL HEALTH/SAFETY INFORMATION.

Spec Gravity:1.26 (H20=1)
Evaporation Rate & Reference:NONE GIVEN BY MANUFACTUR
Solubility in Water:NOT SOLUBABLE
Appearance and Odor:GREY PASTE, PUNGENT ODOR
Corrosion Rate:N/D

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2, SMOKE PARTICLES WHEN
SUBJECTED TO EXESSIVE HEAT OR FLAME

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH ALL
APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS. COORDINATE WITH
SUPPORTING INSTALLATION AND/OR MACOM ENVIRONMENTAL OFFICE PRIOR TO
DISPOSAL

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.